Guru Hub 3 Core
      Back to home
      1. Help Center
      2. Guru Hub 3 Core

      Guru Hub 3 Core approved meter list

      Guru Hub 3 Core manages and monitors up to 4 utilities by directly connecting to wired mbus meters. It can also control up to 2 external control devices, such as shut-off valves, and can integrate into HIUs or heat pumps via Modbus.

      Hub 3 Core Details: M-Bus - 1 input with up to 4 meters. Modbus - 1 input/output. Relay outputs - 2.

      Find out more about the Guru Hub 3 Core on our website. Or download our brochure directly

      Meters which are connected to the Hub 3 Core must support a baud rate of 2400 in order to be read.

      Mbus Heat Meters

      Mbus Cooling Meters

      Mbus Water Meters

      Mbus Electricity Meters

      Dual Utility Meters

      Modbus supported devices

      Pulse meters

      Mbus Heat Meters

      Approved by Guru Caveats Default mbus address

      Zenner Zelsius C5

      Fully Approved None mbus/0

      Sontex Superstatic 449

      Fully Approved None mbus/0

      Kamstrup Multical 601

      Fully Approved None Last 2 digits of the serial number of the meter where the last 3 digits are less than 250 otherwise the last 3 digits

      Kamstrup Multical 602

      Fully Approved None Last 2 digits of the serial number of the meter where the last 3 digits are less than 250 otherwise the last 3 digits

      Kamstrup Multical 603

      Fully Approved None Last 2 digits of the serial number of the meter where the last 3 digits are less than 250 otherwise the last 3 digits

      Kamstrup Multical 403

      Fully Approved None Last 2 digits of the serial number of the meter where the last 3 digits are less than 250 otherwise the last 3 digits

      Evinox Mod RC15

      Fully Approved None mbus/0

      Itron CF Echo II

      Fully Approved None mbus/0

      Landis+Gyr T230 Ultraheat / Ista T 230 Ultego III Smart

      Fully Approved None mbus/0

      Engleman US2

      Fully Approved None mbus/0

      Engelmann SensoStar U S3 

      Fully Approved None mbus/0

      Danfoss Sonometer 1000 

      Fully Approved None mbus/0

      Danfoss Sonotometer 1100, Sharky 775, Rossweiner Ultrasonic

      Fully Approved None  Old generation meters are mbus/0, new models are the last two digits of the serial number

       

       

       

      Mbus Cooling Meters

      Approved by Guru Caveats Default mbus address

      Axioma Qualsonic E3

      Fully Approved None mbus/0 with the cooling registers from the mbus frame

       Itron CF Echo with cooling tariff

      Fully Approved None mbus/0

       

      Mbus Water Meters

      Approved by Guru Caveats Default mbus address

      Maddelena Evo

      Fully Approved None mbus/0

       

      Mbus Electric Meters

      Approved by Guru Caveats Default mbus address

      Inepro PRO1

      Fully Approved None mbus/0

       

      Dual Utility Meters

      Approved by Guru Caveats Default Modbus address

      Axioma Qualsonic 

      Fully Approved None last two digits of the serial number with the appropriate registers from the mbus frame

       Itron CF Echo with cooling tariff

      Fully Approved None mbus/0

       

       

      ModBUS supported devices

      Approved by Guru Caveats Default Modbus address

      Altecnic SATK32

      Fully Approved None Address 1

       

      Pulse to mbus converters

      Approved by Guru Caveats Default mbus address

      IZAR Port Pulse Mini

      Fully Approved None The address is dependent on what is set in the IZAR software - to utilise both mbus outputs the correct registers should be used.

      If the meter you wish to use is not listed above, then please email support@gurusystems.com to discuss how we can test this for you.